During the pneumatic conveying of plastic pellets, it has been observed that materials with similar physical characteristics may develop a substantial difference in pressure drop. In this work, the pressure drop in a particle-laden 2.7 meter long horizontal channel with circular cross-section is presented from an experimental perspective. Experiments are carried out for cylindrical polystyrene beads with an average diameter of 3.2 mm and mass loadings of 0.06 to 0.11 (kg particles/kg gas). The air mass flow rate was studied in the range from 0.085 kg/s to 0.170 kg/s. The pressure drop curve is shown as a function of air velocity and particle load. Response surface methodology showed high statistical significance for air velocity, particle load and their cross-relation.

This work focuses on the adsorption of Bromelain in expanded bed conditions, such as the adsorption kinetics parameters. The adsorption kinetics parameters showed that after 40 minutes equilibrium was achieved and maximum adsorption capacity was 6.11 U per resin mL. However, the maximum adsorption capacity was only determined by measuring the adsorption isotherm. Only by the Langmuir model the maximum adsorption capacity, Qm, and dissociation constant, kd, values could be estimated as 9.18 U/mL and 0.591, respectively, at 25 ºC and 0.1 mol/L phosphate buffer pH 7.5. A column made of glass with an inner diameter of 1 cm was used for the expanded bed adsorption (EBA). The residence time was reduced 10 fold by increasing the expansion degree 2.5 times; nonetheless, the plate number (N) value was reduced only 2 fold. After adsorption, the bromelain was eluted in packed bed mode, with a downward flow. The purification factor was about 13 fold and the total protein was reduced 4 fold. EBA showed to be feasible for purification of bromelain.

The essential oil of key lime (Citrus aurantifolia) was obtained by steam distillation at normal conditions (1.0 bar/25ºC) with steam at 110ºC, during 10h. The GC analysis identified about 10 main substances, being limonene, p-cymene, myrcene and beta-bisabolene the most significant compounds. Aldehyde content increased significantly during distillation time (upper phase). After 10h of process, oil has presented more than 3% of aldehydes content due to oxidative reactions.

The mass transfer process in a perforated rotating disc contactor (PRDC) using a polymer-polymer aqueous two-phase system was investigated. The results show that the efficiency did not show a regular trend with the increase of the dispersed phase velocity and increased with the rotation velocity. The separation efficiency was higher for three rotating discs than for four discs. The increase in tie-line length decreased the efficiency. The separation efficiency reached high values, about 96% under conditions studied in this work.